Single Station Curler – Liner

TECHNICAL SPECIFICATIONS:

Machine Dimensions:

3240 mm x 1455 mm x 2030 mm (LxPxH)

Approx. Machine Weight:

2100 Kgs.

The single station automatic curler – liner, is able to curl and line the components at one time.

The machine frame is made of welded steel and coated, the structure will be mounted in one station.

To simplify the format change and the maintenance, the head is releasable and can be tilted 60° to the rear of the machine by a pneumatic cylinder, actuated by a selector switch.

At the entrance of the machine two separators put into phase the lids one by one, which will be engaged by the feeding bars moved by an oscillation system, and then positioned under the working station. The oscillation system allows the lids to be maintained under the curler-liner for a longer period of time, in order to perform superior quality curling and lining. The lifting of the curling and lining mandrels is also performed by an oscillation system and the rotation speed is controlled by an inverter.

The advancement of the curling rolls is performed by a mechanical cam, and independent of the mechanics of the machine this curling station can be switched off in case the curling operation is not required, performing only the lining of the lids. The curling rolls are built with a specific material depending on the type of work required. A micro-lubrication system of the profile is installed, in order to extend the life of rolls.

At the end of the curling and lining operation, the lid will exit the machine.

The output of the machine will be equipped with a tape (optional) that will bring ends or lids to the stacking station.